Havis Shields Window WGI D23 1 6 User Manual

INSTALL INSTRUCTIONS WGI-D23-1 & 6

INTERIOR WINDOW GUARDS

2006-2007 DODGE CHARGER

TOOLS REQUIRED:

Power drill

Drill bits – 1/8”, 5/32”

T-25 tamperproof torx bit

Phillips screwdriver

HARDWARE:

QTY DESCRIPTION

PART #

Upper mounting bracket

WGI-MB-12-90

GSM33195

GSM33194

GSM34190

GSM31005

#10 x ¾” Sheet metal screw

#10 x ½” Sheet metal screw

¼” x ½” T-25 Tamperproof bolts

¼” Flat Washers

Always!

ꢀ Read all instructions before installing any Havis-Shields Equipment Corp products.

ꢀ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!

ꢀ Use hardware provided with install kit

SUBASSEMBLY:

Photo 1

1. Bend window guard so it contours the door as

shown in photo #1.

2. Determine the proper window guard for each

window.

3. If installing aluminum door panels refer to those

instructions at this time. They will need to be

installed first.

WGI-D23-INST-10-06